Purpose of Interlocking Brick Pavers

The principle of interlocking could be the inability of pavers to maneuver independently from the neighbors. Interlocking concrete pavers was popular inside the Roman Empire. The roads were built with very tight fitted stones, intent on a compacted base. Today’s concrete pavers are produced to help you ensure a great interlock.

When making or constructing your driveway, patio or pool deck, you must take into consideration the interlocking system which is: Vertical, Rotational and Horizontal Interlock.

Vertical Interlock is achieved with the transfer of loads for the surrounding units through the sand which is used in the joints.

Rotational Interlock can be enhanced with the pavement cross-section. This may cause the pavers to tighten and stiff through loads throughout the entire pavement, helping the structural capacity. After this process created, the pavers will secure.

Horizontal Interlock is achieved by making use of patterns that disperse forces from the vehicles. Research indicates that Herringbone patterns will be the best pattern for maintaining interlock. Keeping that in mind, the Herringbone pattern is mandatory in areas with heavy automobile traffic, being a driveway or even a parking area. Edge Restraints will likely play a crucial part on the interlocking system. They conserve the horizontal interlock and therefore are necessary to be put across the perimeter from the brick pavers.

Preparing the area where the brick pavers will likely be placed also plays an essential roll on the interlocking process. Normally the excavation is about eight inches deep, four inches is perfect for the Lime Rock. ? inches is perfect for the sand leaving 2 3/8 inches to the brick pavers. It is very important that the SAND and LIME ROCK are very compacted using a Vibratory Roller or using a Reversible Plate Compactor and leveled out. As soon as the pavers have established yourself, as well as the restraint edge is positioned across the paved area, sand flows into the paved area, and it’s also again compacted using the Vibratory Roller or having a Reversible Plate Compactor to ensure that areas in between each brick pavers are full of the sand, making the interlock system stronger.

The sturdiness of brick pavers is far in excess of asphalt or concrete slabs. With asphalt or concrete slab you will constantly have cracks. Caused by the weather and movement of the soil. Making your weekends less enjoyable and time intensive, due to work that you will have to perform by making use of crack fillers towards the cracks. With pavers you won’t have this challenge; these are quite strong and sturdy. The durability of brick pavers have to do with 20 to 25 years or so, and in the unlikable event that particular fails, it is very simple to get replaced. Making brick pavers an extremely intelligent investment for your property.

For more details about landscaping design go to our resource.

Leave a Comment