SA-3 cylinder shape burrs are perfect for interior contour work and deburring. Because of the extreme hardness on this tungsten carbide, quite a few on far more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs are generally used on ferrous and non-ferrous metals, soft steel, and also for all non-metal materials such as stone, plastics, hard wood, and ceramic. Double cut burrs will leave a rather smoother finish than single cut on account of producing smaller chips because they cut away the fabric. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is among the most popular cut and will view you through most applications.
Machines Applied to:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Surefire, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are perfect for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed is decided by the material you’re using your burr on. If you are experiencing chipping, you are most likely operating at too high of speed to the application. Start with a slower speed and increase as you go along before you reach the best results
Apply light pressure and allow the tool carry out the work. Bearing down on the tool can lead to reduced tool life as well as a dull burr.
Always wear proper PPE to feature (however, not limited to) safety glasses, hearing protection, respirator, and safety gloves. Keep all guards available in your machine.
Avoid use on electrical energy drills; the slower speeds can lead to chipping of one’s workpiece.
For details about SA-3 Carbide Burrs you can check this useful internet page