There are lots of general service fluorescent tubes in the market place today, until recently we were holding considered the most cost effective lighting solution available. The down-side to this particular for of lights is that each tube has a tiny amount of mercury vapour, a toxic heavy metal. This can provide not really a health risk when the tubes are broken, but could also accumulate in landfills before entering the lake table or causing further pollution.
Fluorescent lamps use electricity to excite mercury vapour in the glass tube try to require a ballast to control the flow of power with the lamp. A starter is incorporated in the circuit to heat the contact ends in the tube that ionizes the mercury vapour creating UV light. The inside of the tube is coated with a phosphor material that glows when confronted with the UV light produced by the mercury in the fluorescent tube.
Recent developments in SMD (Surface Mount Diode) LED technology have meant that LED based fluorescent tubes have become a reality. LEDs certainly are a extremely effective kind of lighting product made up of small chips of conductive material that release light whenever a current is applied for many years. They contain no filaments and will produce up to 25 times more light per watt than conventional lights.
LEDs require much less energy inside their manufacture than fluorescent tubes, simply 3% from the energy they’ll consume over their life expectancy is consumed within their manufacture, plus they are also produced from non-toxic materials. The tubes are manufactured from polycarbonate, a material that’s more robust and durable than glass, so accidents is not going to require special cleanup procedures.
While LED technologies are more expensive than existing fluorescents at face value, they will last as long as 10 x so long, while consuming 65% less energy. Generally in most general purpose lighting applications they additional cost of the LED technology will more than purchase itself within the first Eighteen months.
The one drawback may be the tighter beam angle in the LEDs, while many tubes are produced from a polycarbonate light diffusing material, others have a very narrow focus which may ‘t be ideal for replacing existing tubes. Many fluorescent fixtures are designed with reflectors which help to distribute the sunlight from your tubes evenly within their intended environment. LED flood light singapore is a problem similar to that which was faced when compact fluorescents began replacing incandescent bulbs, this is a problem which will soon be overcome and allow faster adoption on this emerging lighting technology.
For additional information about LED high bay light Singapore see this useful web portal.