Carbide Burrs (also called Rotary Burrs) bring cutting, shaping, grinding but for the eliminating sharp edges, burrs and excess material (deburring).
1. What material can Carbide Burrs provide on?
Carbide burrs can be used on many materials. Metals including steel, aluminum and iron, all kinds of wood, acrylics, fibreglass and plastics. When utilized on soft metals for example gold, platinum and silver, carbide burrs are perfect since they last a long time with no chipping or breaking.
Steel, Carbon Steel & Stainless Steel
Iron
Aluminium
Titanium
Cobalt
Nickel
Gold, Platinum & Silver
Ceramics
Fibreglass
Plastic, Carbon Fiber Reinforced Plastic (CRP), Glass Fibre Reinforced Plastic (GRP)
Brass, Copper & Bronze
Zinc
Wood
Different cuts of carbide burrs will be ideal to a particular materials, begin to see the next point below to discover more regarding the various cuts.
What can You utilize Carbide Burrs In?
Ideally carbide burrs are widely-used in Air Tools i.e Die Grinders, Pneumatic rotary tools and speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools for instance a Dremel.
Use a handpiece that runs true i.e with no wobble.
Who Uses Carbide Burrs?
Carbide burrs are trusted for metalwork, tool making, engineering, model engineering, wood carving, jewellery making, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. And are utilized in the aerospace, automotive, dental, metal sculpting, and metal smith industries to mention only a few.
2. Carbide Burrs Commonly Are available in Two Cuts; Single Cut and Double Cut (Diamond Cut)
Single cut (one flute) carbide burrs have a very right handed (Up cut) spiral flute. These tend to be in combination with stainless steel, hardened steel, copper, cast iron, and ferrous metals and will remove material quickly having a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy elimination of material
Milling
Deburring
Cleaning
Creates long chips
Double cut carbide burrs are generally suited for ferrous and non ferrous metals, aluminium, soft steel as well as for all non-metal materials such as plastics and wood. They’ve got more cutting edges and will remove material faster. Double cut are now and again referrred to as Diamond Cut or Cross Cut (2 flutes cut across the other person) will leave a smoother finish than single cut on account of producing smaller chips since they cut away the material. Use for medium-light stock removal, deburring, finishing and cleaning. A double cut carbide burr is easily the most popular cut and may view you through most applications.
Medium- light removing material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
3. What Speed or RPM if you work with your Carbide Burrs?
The speed from which you employ your carbide bur inside your rotary tool is determined by the information you’re using it on and the contour being produced but it is pretty sure you no longer need to exceed speeds of 35,000 RPM.
4. Do Not Apply Too Much Pressure
As with most drill bits and burrs, let the burr perform work and apply just a little pressure otherwise the cutting edges from the flutes will chip away or become smooth prematurely, decreasing the life of your burr.
5. Carbide Burrs are Harder Than HSS Burrs
Our Carbide Burrs are machine ground from the specially chosen grade of carbide. Due to extreme hardness with the Tungsten Carbide they are often utilized on considerably more demanding jobs than HSS (Very fast Steel).
Carbide Burrs also perform better at higher temperatures than HSS so that you can run them hotter, and then for longer.
HSS burrs will begin to soften at higher temperatures so carbide is usually a more sensible choice for lengthy term performance.
What are Features of Tungsten Carbide Burrs?
Long life
Use for too long production runs
High stock removal
Suitable for using on many hard and tough materials
Perfect for Deburring, finishing, carving, shaping and smoothing welds, moulds, dies and forgings
6. Maintain the Carbide Burr On The Move
When you use your carbide burr do not maintain it still for too much time as this prevents the burr from digging and jabbing in your material causing unsightly marks and roughness.
End with an ‘up’ stroke for any smoother finish on your work.
Stay Safe:
Always make sure your burr shank is well inserted into your collet and clamped down tightly
Keep pressure light whilst the bur moving, focusing on the greatest material first
Be sure that your effort is secured tightly in your work bench
Don’t snag or jam your burr into the work
Wear eye protection at least, but better still utilize a full shield to your face
To learn more about SF-1 Carbide Burrs just go to the best net page