Carbide burs are some of the most widely used and versatile cutting tools used in virtually every industry. Made of Tungsten Carbide they may be primarily accustomed to remove burrs (the tiny flakes of metal) that always stay with the task piece as soon as the machining process. Burs can be purchased in standard lengths long series (for tough to reach applications) plus miniature sizes (for usage in pencil grinders).
Features
Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and has to be used with rigid tool holding systems
Uncoated tools feature only the base substrate with no additional treatment or coatings and they are suited to a wide range of applications
Round shanks allow use with a wide array of tool holding systems
Double-cut style has rows of cutting teeth cut in two intersecting directions for fast material removal as well as a rougher finish
For deburring, interior contour work
CUT TYPE
Singlecut
General purpose tool for certain, copper, brass and steels
Fairly aggressive cutting action, with good material removal rates
This tool leaves a great finish on most all materials, though the bite could be demanding on operators
Doublecut
For general purpose use including cast iron, copper, brass and steels
The Doublecut works with a cross flute of exactly half the amount of standard flutes inside a opposing helix
Sliver dimensions are greatly reduced, as is also the operator fatigue from your balanced cutting forces
Lower RPMs could possibly be utilized with little negative impact on performance
The decreased load means operator’s often feeding it more aggressively
Alumacut
Best for all non-ferrous, non-metallic workpieces like aluminum, zinc, plastic, wood, etc.
An exceptionally aggressive cutting action, with minimum probability of plugging these flutes up
Diamondcut
Is often a finer cut of opposing helixes
Operating control is superb for the reason that biting action is limited as is the silver size made out of it
This version is usually preferred to acquire where titanium along with other difficult materials (superalloys) are being deburred
Using the teeth being smaller and a little more fragile consequently, tool life is not often a few import
Fiberglass is likely to cut nicely with Diamondcut
Chipbreaker
Another form of the Doublecut, this is a slightly less aggressive tool whose main purpose is always to simply interupt the cut
A single, opposing helix is ground within a spiral around the tool, typically
Silver size decreases, surface finish goes down marginally, hand control rises, marginally
For details about https://www.burrs4less.com/sa-9-31.html go our new website