SA-3 cylinder shape burrs are good for interior contour work and deburring. Due to extreme hardness on this tungsten carbide, quite a few on far more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs are usually utilized on ferrous and non-ferrous metals, soft steel, as well as for all non-metal materials for example stone, plastics, hard wood, and ceramic. Double cut burrs leaves a rather smoother finish than single cut due to producing smaller chips while they cut away the fabric. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is easily the most popular cut and can help you through most applications.
Machines Utilized on:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are good for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed will be determined from the material you are using your burr on. If you might be experiencing chipping, you’re operating at excessive of speed for the application. Start using a slower speed while increasing in the process until you achieve the greatest results
Apply light pressure and permit the tool do the work. Bearing down on the tool will lead to reduced tool life as well as a dull burr.
Always wear proper PPE to incorporate (although not limited by) safety glasses, hearing protection, respirator, and hand protection. Keep all guards set up on your own machine.
Avoid experience electrical energy drills; the slower speeds can lead to chipping of your workpiece.
For more info about SA-3 Carbide Burrs see our new site